Mold remediation
Water damage drying
Fire & smoke cleanup
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Mold Remediation for Orlando Homeowners
Mold grows fast in Orlando’s humidity, and once it takes hold behind drywall or under flooring, it won’t go away on its own. Dryden Restoration Orlando has handled mold remediation for homeowners across Orange and Seminole counties since 2005, with every job covered by a written 365-Day Done Right Promise. If a repair fails within a full year, we come back and fix it at no charge. That’s not a verbal assurance, it’s a document you sign before we start. Same-day assessments are available throughout the Orlando area. Call (850) 786-4472 and a live person answers, day or night.
Mold Removal Service
Mold Removal Service is the physical removal of visible mold growth from building materials and surfaces throughout your Orlando home. You need this when you can see dark spots on drywall, baseboards, ceilings, or around windows, or when a room has the persistent musty smell that doesn’t clear with cleaning. At Dryden Restoration Orlando, we remove the mold at its source, not just wipe the surface, and we back the work with our home-tested process: a written price before any tool is touched, a named arrival window, and a written guarantee. Typical mold removal service in Orlando runs $450 to $1,800 depending on square footage and how deep the growth has penetrated.
Surface Removal
This covers mold on non-porous and semi-porous finishes like tile, glass, sealed wood, and painted trim. Our technicians use HEPA-filtered vacuums and EPA-registered antimicrobials, then verify the area with moisture meters before calling it done.
Structural Removal
When mold is inside drywall, insulation, or subflooring, the affected material has to come out and be replaced. We cut clean margins around the affected area so no hidden spores remain behind the wall.
Restoration work we handle
Mold Remediation Services
Mold Remediation Services cover the full containment, removal, cleaning, and prevention cycle when mold has spread beyond a single spot. In Orlando, this usually means we’re dealing with a hidden leak: an AC condensate line, a roof flashing failure, or a pinhole pipe behind a wall. Dryden Restoration Orlando sets up negative air containment, removes the affected material, cleans and dries the cavity, and treats the area to prevent regrowth. Mold Remediation in Apopka homeowners face the same central Florida humidity issues we see every day across the metro. Expect $1,800 to $6,500 for a full containment and remediation job in Orlando, depending on the affected area’s size and accessibility.
Containment and Air Control
We use HEPA-filtered negative air machines to keep spores from moving into clean rooms during removal. The work zone is sealed with 6-mil poly sheeting, and air pressure inside stays lower than the rest of the house.
Post-Remediation Verification
After the Mold Removal and cleaning are complete, we run air sampling and surface testing to confirm spore counts have returned to normal background levels for your neighborhood. You get the results in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal
Professional Mold Removal is what separates “cleaned the spot you can see” from “found and fixed the moisture source.” Most Orlando mold problems start with water you never noticed: an AC drain pan that overflows every summer, a window frame that leaks during afternoon thunderstorms, or a bathroom fan that vents into the attic instead of outside. Our team at Dryden Restoration Orlando uses Dri-Eaz and Phoenix moisture meters to trace water back to its source before we remove anything. That’s the difference between a real fix and a return visit in six months. Professional Mold Remediation in Orlando typically costs $350 to $1,200 per affected room, with whole-home jobs scaling from there.
Source Correction
We don’t remove mold without addressing the moisture that’s feeding it. Every mold removal job includes a written diagnosis of the water source and the steps we took to stop it.
Furnishings and Contents
We treat and clean salvageable items like furniture, clothing, and rugs when they’ve been exposed. Items that can’t be cleaned are documented and disposed of per IICRC guidelines.
Mold Inspection
A Mold Inspection tells you whether you have a mold problem, how big it is, and what’s causing it. In Orlando, inspections are most common after a water leak, before buying or selling a home, or when someone in the house has unexplained allergy symptoms that flare up indoors. Dryden Restoration Orlando performs visual inspections combined with moisture mapping and air sampling when warranted. Our inspectors are background-checked and arrive in uniform, and you’ll get a written report with photos and moisture readings. Mold inspections in Orlando run $250 to $600, depending on how many samples you need and how large the home is.
Moisture Mapping
We use Phoenix moisture meters and thermal imaging cameras to find wet spots inside walls, floors, and ceilings before they show visible staining. This catches mold early, when remediation is cheaper and far less disruptive.
Air Quality Sampling
When you need to know what’s in the air, not just what’s on the walls, we collect spores on calibrated cassettes and send them to an independent lab for analysis. Results usually come back within 48 to 72 hours.
Mold Removal Specialist
A Mold Removal Specialist is someone trained to handle the containment, removal, and disposal of mold-affected materials safely. In Florida, you want a specialist who understands humidity: what a typical Orlando home’s indoor RH (relative humidity, the amount of moisture in your air) should be and how to keep it there. Mold Remediation in Orlando is our core service, and our specialists are trained to IICRC S520 standards, the recognized benchmark for mold remediation. Carl Brandt, who leads our team, has spent nearly two decades working on water and mold damage in central Florida homes. Specialized containment and removal work is priced per job, usually between $900 and $4,500 in Orlando.
Containment Expertise
A specialist knows when a job needs full containment versus isolated glove-bag removal. That call changes the price significantly and shouldn’t be made by someone learning on the job.
Protective Protocol
Our remediation team wears full PPE, uses HEPA-negative air in the work zone, and follows controlled entry and exit procedures so spores don’t travel with them to other rooms.
Black Mold Removal
Black Mold Removal refers to removing Stachybotrys chartarum, the dark greenish-black mold most often found on drywall and wood that’s stayed wet for weeks. Orlando homes are particularly vulnerable when a leak goes unnoticed behind an exterior wall or under a sink cabinet. You can’t identify Stachybotrys by color alone; lab analysis is the only way to confirm it. What matters is that any heavy black-colored mold growing on building materials needs professional removal with containment. Dryden Restoration Orlando handles black mold removal with full containment and written post-remediation verification. Expect $1,500 to $7,000 in Orlando depending on how far the mold has spread and how much structural material must come out.
Controlled Demolition
Black mold on drywall and insulation requires removing the affected materials, not painting over them. We cut clean lines, bag the debris in the work zone, and run HEPA air scrubbers the entire time.
Verification Testing
After black mold removal, we run clearance testing to confirm spore levels are back to normal. We’ll give you the lab report rather than just telling you it’s fixed.
Mold Removal Contractor
A Mold Removal Contractor is the company you hire to plan, price, and perform mold remediation. In Florida, mold remediation contractors must hold a state license. Dryden Restoration Orlando is a fully licensed and insured independent Kingswell company, and we’ve worked in central Florida homes since 2005. What makes a good contractor different from a bad one is what’s in writing: a scope of work, a price, a schedule, and a guarantee. We provide all four. Mold Remediation in St. Cloud and across the Orlando metro follows the same Kingswell process. Contractor-led remediation in Orlando ranges from $1,200 to $8,500, with the price set before we begin and held until the job is done.
Written Scope Before Work Starts
You’ll get a document that says exactly what we’re removing, what we’re cleaning, what equipment we’ll run, and what it costs. The number doesn’t change at the door.
Insurance Documentation
We photo-document everything and provide the detailed reports your adjuster needs to process a mold claim. Our team coordinates directly with insurance carriers throughout the claim.
Bathroom Mold Removal
Bathroom Mold Removal is one of the most common services we perform in Orlando because bathroom humidity stays high every month of the year. Showers, tubs, and vanities all create moisture that soaks into grout, caulk, drywall, and the back of cabinets. Most bathrooms have exhaust fans that are undersized or vent into the attic, adding to the problem. We remove the mold from tiles, grout, drywall, and hidden cavities behind showers, then recommend the fix that prevents it from returning. Typical bathroom mold removal in Orlando costs $400 to $2,200, depending on whether we can clean surfaces or need to pull out drywall and rebuild the affected area.
Tile and Grout Remediation
Our technicians use professional-grade antimicrobials and steam treatments to kill mold in grout lines and on tile surfaces. When grout is too far gone, we re-grout and seal the area.
Shower Pan and Backer Board
When mold grows behind tile and the backer board is saturated, surface cleaning won’t help. We remove the tile, replace the damaged board, and rebuild the shower properly.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our mold remediation work relies on professional equipment from the brands we trust and service every week. We run Phoenix dehumidifiers and air scrubbers on nearly every remediation job, because their units deliver the precise low-grain refrigerant performance Orlando’s humidity demands. We also use XPOWER air movers and HEPA filtration systems for containment and drying in tight spaces. Injectidry systems let us dry wall cavities and under cabinets without tearing them open, which means many jobs finish with less demolition than the homeowner expected.
We’re not tied to a single manufacturer. Our team picks the right equipment for your home’s specific situation, and every machine we run is maintained to manufacturer specification. Whether you have a problem behind a Phoenix-dried wall or need an Injectidry setup for a tight cavity, we can help.
Signs You Need a Pro Right Now
- A musty smell that doesn’t clear after cleaning. That odor is usually microbial volatile organic compounds, a byproduct of active mold growth. If you can smell it but can’t see it, the mold is likely inside a wall, under flooring, or in your HVAC system.
- Visible dark spots on drywall, baseboards, or ceilings. Discoloration that keeps coming back after you scrub it signals mold roots in the material. In Orlando’s climate, that growth can spread under the paint surface faster than most homeowners expect.
- Recent water damage that wasn’t dried professionally. A leak that stayed wet for more than 48 hours gives mold a strong start. If the area wasn’t dried with professional equipment after the water was removed, mold and bacteria are likely developing behind the surface.
- Family members with worsening allergy or asthma symptoms indoors. Mold spores trigger respiratory issues, and symptoms that improve when you leave the house are a red flag. Testing can confirm whether mold is the source.
- Stained or warped drywall around windows, doorways, or plumbing fixtures. Those stains mean water is present inside the wall cavity. Where there’s trapped moisture in central Florida, mold follows within days, not weeks.
Our Process, Step by Step
- 1
Assessment and moisture mapping. We inspect the affected area, map moisture with Phoenix and Dri-Eaz meters, and identify every water source feeding the mold. You get a written diagnosis of what we found and what we recommend.
- 2
Written price and scope. Before any work starts, you receive a document with the exact price, the work we’ll perform, the equipment we’ll run, and the schedule. That number does not change unless you ask for additional work.
- 3
Containment and air scrubbing. We seal the work zone with poly sheeting and run HEPA air scrubbers to create negative air pressure. Spores stay in the work zone instead of drifting into your living room or kitchen.
- 4
Removal, cleaning, and drying. We remove affected materials, clean salvageable surfaces with antimicrobials, and run professional dehumidification until moisture readings return to the right range for your home.
- 5
Verification and the 365-Day Done Right Promise. We run clearance testing and give you the results in writing. Then we hand you the Kingswell Guarantee: if any covered repair fails within 365 days, we come back and fix it at no charge.
How Much Does Mold Remediation Cost in Orlando?
A small bathroom mold cleanup in Orlando runs $400 to $900. A single-room remediation with containment and some drywall replacement runs $900 to $2,200. Whole-home mold remediation, where multiple rooms or an HVAC system are affected, runs $3,500 to $8,500, and severe structural cases can go higher. See our Mold Remediation cost guide for more detail. The variables that move the price are how far the mold has spread, whether it’s behind walls, whether HVAC ductwork is contaminated, and how much material needs to be removed and rebuilt.
To avoid overpaying, get a written scope of work before anything starts. A company that won’t put the price and the plan in writing is asking you to fund their learning process. Our free estimates include a full inspection, moisture mapping, and a line-item quote. Call (850) 786-4472 and we’ll schedule your assessment.
Our Service Area Near Orlando
Dryden Restoration Orlando serves homeowners throughout the greater Orlando metro. We regularly work in Deltona, Winter Garden, Casselberry, Winter Springs, Meadow Woods, DeBary, Forest City, Conway, and Mount Dora. Most assessments within the metro happen the same day you call, and we give you a named arrival window, not a four-hour “sometime around noon” promise. If you’re in one of the surrounding communities, you’ll get the same Kingswell pricing and the same written 365-Day Done Right Promise.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Mold Remediation in Orlando
Mold remediation is the process of containing, removing, cleaning, and drying mold-affected areas in a home. It includes finding the water source, sealing off the work area, removing contaminated materials, and verifying the air is clean when we finish.
A single-room remediation typically takes 1 to 3 working days. Whole-home jobs with structural removal and rebuilding can run 5 to 10 days. We’ll give you a schedule in writing before we start, and we stick to it.
Most Orlando mold remediation jobs fall between $900 and $6,500. The final number depends on how much area is affected, whether the mold is behind walls, and whether containment is needed. Call (850) 786-4472 for a free estimate with a written quote.
We run Phoenix and Dri-Eaz drying equipment and Injectidry cavity drying systems daily. Our technicians are trained on all of them, and we maintain every unit to manufacturer spec.
Our phones are answered by a live person 24 hours a day, 7 days a week. For a mold emergency involving active water, we can often get a crew to your home the same day to stop the spread.
If any covered mold remediation repair fails within one year, we return and correct it at no charge. The guarantee is in writing on every job, and we’ll explain exactly what’s covered before you sign.
Clear the affected area of personal items and small furniture. We’ll handle the rest: containment, removal, cleaning, and disposal, with photo documentation throughout for your records and your insurer.
Schedule Your Mold Remediation Service in Orlando Today
Mold doesn’t wait, and neither should you. Call (850) 786-4472 for a no-obligation estimate from Carl Brandt and the Dryden Restoration Orlando team. You’ll get a straight answer, a written price, and a named arrival window, all backed by the 365-Day Done Right Promise.
Written by Carl Brandt, Owner at Dryden Restoration Orlando, serving Orlando since 2005.